The BRAKOO davit with LONGITUDINAL rail beam from Accesus is a special davit based on the more straightforward and lower height configurations of the BRAKOO davit type 1A or 1B.

In this case, the BRAKOO davit is installed on steel rail beams perpendicular to the davit arm, allowing the davit to be moved around the entire perimeter of a building’s roof. This model is adaptable for rails with IPN-140 beams, although the equipment can be adapted to other types of railings.

If we look at the load capacity that it can support, the BRAKOO davit on the perpendicular rail beam is officially approved to suspend suspended scaffolding with lifts with a maximum load capacity of 300, 400, or 500 kg.

BRAKOO davit with LONGITUDINAL rail beam needs two operators, although it is very fast using screws and pins that fix the 25 kg counterweights in the davit housings. The flight will vary depending on the BRAKOO davit we are starting from to install it on the vertical rail, but it does not usually rise to over 2 meters. In fact, the most significant flight we build in Accesus is a BRAKOO 1B on a rail, and the maximum flight was 1.75 meters.